Measurement Computing PointScan Road Map rev.2.0 User Manual
Pointscan road map, Dedicated, Shared” local area networks (lan)
PointScan Road Map
For use with
“Dedicated”
or
“Shared” Local Area Networks (LAN)
IOtech, Inc.
25971 Cannon Road
Cleveland, OH 44146-1833
Phone: (440) 439-4091
Fax: (440) 439-4093
E-mail: [email protected]
Internet: www.iotech.com
PointScan Road Map
For use with
“Dedicated”
or
“Shared”
Local Area Networks (LAN)
p/n
1085-0910
Rev.
2.0
877995
Table of contents
Document Outline
- PointScan Road Maps
- Table of Contents
- Introduction
- 1- Hook up the PointScan Hardware
- 2 - Power up the PointScan Hardware
- 3 - Set up Ethernet Communications
- 4 - Install the IOToolKit Software
- 5 - Start up the IOToolKit Software
- 6 - Configure each Ethernet Module
- 7 - Configure each RS-485 Connected Module
- 8 - Fill in the "Connected To" Information
- 9 - Download the Configuration ...
- 10 - Install the KEPServerEX Software
- 11 - Start up the KEPServerEX Software
- 12 - Configure KEPServerEX
- 13 - Configure DASYLab as the Client Program