Measurement Computing PointScan Road Map rev.2.0 - Manual (Page 32)

Step 13) Configure DASYLab as the Client Program
Install DASYLab
DASYLab software versions that precede 6.0 do not support
PointScan products. If your DASYLab version precedes 6.0, please
contact [email protected] for upgrade information.
For DASYLab to properly install, the host computer must be using
Internet Explorer version 5.0 or higher.
Install DASYLab as follows:
(a) Launch the DASYLab installation from the DASYLab CD.
Note: The CD should auto-start. If the CD does not auto-start, run the CD start.exe
from the Windows Desktop.
(b) Select “Installation,” then “Full Version.” The actual installation process will begin.
(c) When prompted for your name, company and serial number, enter the requested data.
Obtain the serial number from the CD jacket.
TIP: Keep the serial number in a safe place. You may need to reference it
for future installations and upgrades.
(d) When prompted for the installation directory and program folder, you can use the default
selection, or choose another. We recommend using the default.
(e) When prompted for Setup Type, choose from the available options. We recommend
that you select Typical.
(f) When prompted to select the drivers, “uncheck” all selections, then click .
There are no PointScan related drivers to select. The drivers that are
selected in step 6 are for components that are in addition to PointScan.
28 878395 PointScan Road Map