Measurement Computing WaveBook rev.4.0 - Manual (Page 5)

WaveBook User’s Manual 06-21-01 i
About This Manual
This user’s manual consists of several chapters and “document modules.” The modules are like chapters,
except they may be shared by other manuals, or may be used as stand-alone documents. For these reasons,
the modules do not contain chapter headings, nor do they contain footers that would be consistent with a
particular user’s manual.
The chapters and document modules are arranged in the following sequence.
Chapter 1 – Unpacking and Inspecting Your WaveBook Package
Chapter 2 – An Introduction to WaveBook and Optional WBKs
Chapter 3 – System Setup and Power Options
Chapter 4 – WaveBook Operation Reference
WBK Document Modules
WBK10, WBK10H, and WBK10A Expansion Modules
WBK11 Simultaneous Sample and Hold Card
WBK12, WBK12A, WBK13, and WBK13A Programmable Filter Cards
WBK14 Dynamic Signal Conditioning Module
WBK15 8-Slot 5B Signal Conditioning Module
WBK16 Strain Gage Module
WBK17 Counter-Input Module with Quadrature Encoder Support
WBK20A – PCMCIA/EPP Interface Card
WBKK21 - ISA/EPP Interface Plug-in Board
WBK30 WaveBook Memory Option
WBK61, WBK62 High Voltage Adapters
Chapter 5 – Software, An Introduction
Software Document Modules
WaveView
DIAdem
WaveCal
Chapter 6 – Troubleshooting and Customer Support
Glossary
&$87,21
Using this equipment in ways other than described in this manual can cause personal injury or
equipment damage. Pay special attention to all cautions and warnings.
Reference Note:
If you plan to create your own applications programs refer to the Programmer’s Manual PDF located
on the install CD-ROM. The manual includes program examples and API Command Reference
material. You will need to use Adobe® Acrobat Reader, version 3.0 or later) to view or print the
document. We have included a copy of the reader on the CD.
Reference Note:
Information (not available at the time of publication), will be made available in ReadMe files, or in
supplemental documentation.