beautypg.com

Dbk30a battery module - specifications – Measurement Computing WaveBook rev.4.0 User Manual

Page 38

background image

3-16 System Setup and Power Options

05-15-01

WaveBook User’s Manual

Three LEDs on the DBK30A provide status information on the charging process or the external load.

LED Indicators & Descriptions

POWER IN

Indicates the charger is connected to a source of AC power and to the battery module.

BATTERY CHARGING

Steady Light - Indicates the battery is in the high-current (2 A) charge mode.
Flashing - One or two flashes at a time indicates the batteries are fully charged.

POWER OUT

Indicates power is flowing out to an external device, such as a WaveBook product.

&$87,21

Periodically, fully discharge the DBK30A to inhibit “lazy chemistry” (memory) in the
nickel-cadmium cells. To manually discharge a battery pack, connect a WaveBook to
the pack and leave it powered-on until the indicator lights go out.

Use While Charging. Both operating modes are capable of powering the WaveBook products while being
charged; however, the charging current is reduced, and charging time is increased. If AC power is
interrupted, a new charge cycle will begin automatically when AC power returns.

&$87,21

Even with the AC adapter, the batteries will eventually discharge under a WaveBook
operating load. Charging DOES NOT BEGIN AUTOMATICALLY (except on power-
up). You must manually initiate the next charge cycle. Do not expect a WaveBook
powered by a DBK30A to operate as an uninterruptable power supply.

Stacking Modules

Stacking can be accomplished with splice plates, as discussed earlier in the chapter.

DBK30A Battery Module - Specifications

Name/Function: Rechargeable Battery Module
Battery Type
: Nickel-cadmium
Number of Battery Packs: 2
Battery Pack Configuration: 12 series-connected sub-C

cells

Output Voltage: 14.4 V or 28.8 V (depending on the

selected mode)

Output Fuses: 2 A
Battery Amp-Hours: 3.4 A-hr (1.7 A-hr/pack)

Charge Termination: Peak detection
Charge Time: 2 hours
Charging Voltage from Supplied AC Adapter: 22 to 26

VDC @ 2 A

AC Adapter Input: 95 to 265 VAC @ 47 to 63 Hz
Size: 221 mm × 285 mm × 35 mm
(11" × 8-1/2" × 1-3/8")
Weight: 2.4 kg (6 lb)

This manual is related to the following products: