Measurement Computing WaveBook rev.4.0 - Manual (Page 21)

WaveBook User’s Manual 05-22-01 An Introduction to WaveBook 2-11
Sequencer
Operation: Programmable for channel, gain, and for unipolar/bipolar range in random order
Depth: 128 location
Channel-to-Channel Rate: 1.0-1.1us/channel, all channels equal
Maximum Repeat Rate: 1MHz
Minimum Repeat Rate: 100 seconds per scan
Expansion Channel Sample Rate: Same as on-board channels
High-Speed Digital Inputs/General-Purpose Outputs
Connector: DB25 Female
Configuration: 16 TTL-compatible pins, selectable for input or output
Input Characteristics: TTL-compatible
Output Characteristics: ALS TTL output in series with 33 ohms
Output Updates: Outputs may be changed via program control
Input/Output Protection: Diode clamped to ground and +5V
General Specifications
Warm-up: 30 minutes to rated specifications
Environment:
Operating: 0-50°C, 0-95% RH (non-condensing)
Storage: -20 to 70°C
Power Consumption: 1.4A max @ 15VDC (WBK10A or 516 with WBK13A installed)
Input Power Range: 10-30VDC
Vibration: MIL Std 810E, Category 1 and 10
Dimensions: 220 deep X 285 wide X 45 mm high (8.5 X 11 X 1.75 inches)
Weight: 1.5kg (3.3 lbs)
Included Accessories and Software
Software: WaveView
DIAdem View
DOS and Windows Drivers
WaveCal
Hardware: AC Adapter
Parallel Cable
Users Manual
Optional Accessories
Software: DasyLab
LabView Driver
Hardware: HA-111 Fastener-Panel Handle
CA-115 5-pin male DIN to 5-pin male DIN
CA-116 5-pin DIN to automobile cigarette lighter power cable, 8 ft
CA-178 DB25 to external clock BNC
CA-150-1 Single Male BNC to Male BNC CE Compliant cable
CA-150-8 Eight Male BNC to Male BNC CE Compliant cables