Measurement Computing eZ-Balance rev.9.0 - Manual (Page 31)

eZ-Balance 969391 Windows, Buttons, and Menus 3-13
Report Menu
This menu allows you to generate a report in regard to Balance Solution [if present] and/or Balance
Configuration. A report can be set for one of three formats: NotePad, MS Word, or MS Excel. The default
is NotePad. The format is changed from Display Preferences [under the Edit pull-down menu].
The following is a portion of a report that was generated in the MS Word format, then pasted into this
document. Note that the report can be edited, just any other text in a Word document.
ACQUISITION CONFIGURATION
Hardware Device: WaveBook 516 with WBK14
Analysis Rate: 1000 Hz
Blocksize: 2048
Averages: 5
Cutoff -No Int: 3 Hz
Cutoff -Single Int: 5 Hz
Cutoff -Double Int: 15 Hz
FFT Window: Flat Top
Picture File:
CHANNELS CONFIGURATION
Channel 1: Tach
Name: Tach
Range: 0.00 - 5000. RPM
FSV: 20.00
mV/EU: 1000.
Angle: 0
Rotation Direction: CCW
Trigger Voltage: -1.000
Trigger Direction: NEG (-)
Partial Balance Configuration Report