Measurement Computing eZ-Balance rev.9.0 - Manual (Page 17)

eZ-Balance 987091 A Balancing Project 2-11
Operation: Trim Balance Run
Trim Balance Run
Perform a Trim Balance Run to verify the Balance solution.
Operation: Calculate the Trim Solution
Calculate Trim Solution
A Trim Solution provides an updated Balance Solution using the Trim Run results.
Repeat Trim Balance Runs as needed.
1. Calculate a trim solution.
2. Add trim weights.
3. Perform a Trim Balance Run to verify the new balance solution.
4. Repeat the process as desired to fine tune the balance.
If the Balance Solution does not provide desired results, the unsatisfactory vibration levels may be due to
other machine problems, such as misalignment.