Measurement Computing DIAdem - Manual (Page 27)

DIAdem® 04-19-00 DIAdem Data – Loading and Saving Data 25
Copying, Pasting, and Deleting Data Channels
Not only does the Working area in DIAdem
®
DATA offer you a data overview; you can also
copy, paste and delete data channels in the Working area. You can perform these operations on
individual channels or on groups of channels.
Marking multiple channels Mark all four channels by holding down the left mouse button and dragging the mouse over the
desired channels.
You may also mark the first data channel by clicking with the mouse and then clicking on the
last channel while the Shift Key is held down. You can mark separate, non-contiguous data
channels in the same manner: click on the channels with the left mouse button while the
Control Key
is held down.
Cutting and pasting channels Click on the right mouse button. Choose the option “Cut” from the Context menu. After
confirmation the marked channels will be deleted from the Data area and copied into the
Windows clipboard. Click with the mouse on the second line of the channel overview. Paste in
the contents of the clipboard with <CTRL + V>.
Cut channels are pasted in
from the Windows clipboard
at the marked location.
In this case that leaves
a free channel in the first
line of the Working area.