Measurement Computing WaveView - Manual (Page 14)

WaveView, pg. 12 03-05-02 WaveView
“WBK17” Tab
The “WBK17” tab provides a means of setting the Readings column to run at the post-trigger scan rate.
This system option applies only to WBK17 modules and impacts the Readings Column of WaveView’s
main window.
Setting the Readings column to run at the post-trigger scan rate does not directly affect the
rate at which the Readings column is updated; However, implementing this feature may
affect the overall performance of WaveView while the Readings column is enabled.
System Options, WBK17 Tab Selected
Input Channel Configuration
Columns of the Channel Configuration Spreadsheet
Reference Note:
The above figure does not include WBK17-exclusive columns. See page 17 in regard to additional
columns that are dedicated specifically to the WBK17 module.
WaveView’s configuration spreadsheet provides is used to configure channels and display channel readings.
The top few rows are used for the high-speed digital input and other non-analog channels. The remaining
rows (up to 72) are used for analog input channels. The number of rows varies depending on system
configuration.
LPF Mode and LPF Cutoff
Apply to: WBK12, WBK13,
WBK14, WBK16, and WBK17
HPF Cutoff
Applies to: WBK14,
WBK16, and WBK17
Source Level
Applies to: WBK14 and WBK16
Bridge Type and Invert
Apply to: WBK16 only