Measurement Computing Serial488/4 User Manual
Page 64

Section 3
Command Descriptions
3.25
B6
3600 Baud selected
B7
4800 Baud selected
B8
7200 Baud selected
B9
9600 Baud selected
B10
19200 Baud selected
B11
16 x External clock selected
C#
Parity
C0
Parity is disabled.
C1
Odd parity is enabled.
C2
Even parity is enabled.
D#
Data Bits
D0
Seven data bits selected.
D1
Eight data bits selected.
G#
Handshake Type
G0
Hardware handshaking (RTS/CTS) is selected.
G1
Software handshaking (XON/XOFF) is selected.
G2
No handshaking is selected.
I#####
Serial input bytes available to read
L#
Data EOI
L0
Assert EOI on serial terminator character.
L1
EOI
is disabled.
L2
Assert EOI on last serial input character.
L3
Assert EOI on serial terminator character or last serial character.
N#
Handshake Control
N0
Automatic handshaking, RTS/CTS or XON/XOFF
N1
Hold off serial input, un-assert RTS or send XOFF.
N2
Release holdoff of serial input, assert RTS or Send XON.
N3
Automatic XON/XOFF handshake with Baud Clock x 16 output on
RTS
line, or no handshaking and Baud Clock x 16 output on RTS
line.
O#####
Serial output bytes not yet transmitted out the serial port