Measurement Computing DaqBoard 3000USB Series - Manual (Page 107)

Appendix A
DBK215 16-Connector BNC Connection Module
With 68-Pin SCSI Adaptability for Analog I/O, Digital I/O, & Pulse/Frequency
Overview …… 1
Block Diagram …… 2
Connection Tips…… 3
System Examples …… 4
Using the Screw-Terminal Blocks …… 6
Adding RC Filter Networks …… 12
Specifications …… 14
DBK215 Front Panel
Upper Slot for Terminal Board Wiring Pass-Through
Lower section of 16 BNC Connectors
The DBK215 module is compatible with the following product series:
•
DaqBoard/500
• DaqBoard/1000 • DaqBoard/3000 • DaqBoard/3000USB
Overview
DBK215 Rear Panel
Includes a 68-pin SCSI connector designated as P5.
The DBK215 module includes:
o BNC Access to 16 inputs or outputs (on front panel)
o on-board screw-terminal blocks*
o on-board socket locations for custom RC Filter networks*
o 68-pin SCSI connector (on rear panel)
* The top cover plate must be removed to access the terminal blocks and
the RC filter network section of the board.
DBK215’s SCSI connector (P5) connects to a second 68-pin SCSI connector on the board, i.e.,
DaqBoard/500, /1000, /3000, or /3000USB Series. Connection is made via a CA-G55, CA-G56,
or CA-G56-6 cable. Cable descriptions are provided on page A-2.
The DBK215 provides BNC and screw-terminal access to all analog and digital I/O from the host data
acquisition device. Related to the screw-terminals is a front panel slot for routing all I/O wiring.
Reference Note:
DBK215 is intended for DaqBoard/500, /1000, /3000, and /3000USB Series applications.
Refer to the associated documentation as needed. For information concerning similar16
channel BNC connectivity/interface boards, designed for use with other products, refer to the
DBK213 and DBK214 sections of the DBK Options manual (p/n 457-0905).
Appendix A 886994 DBK215 A-1