Legrand 364516-01 - Manual

IS- 0076 Rev. O Page 1 of 2
OnQ OnQ
OnQ Technologies, Inc.
P.O. Box 60907
Harrisburg, PA 17106
Phone: 800-321-2343
Instruction/Installation Sheet
OnQ CADDX Mounting Plate
IS-0076
Rev. O
Figure 1
1. Introduction:
The OnQ Caddx Mounting Plate is to be used with the Caddx Networkx NX-8 Security System. The Caddx
Mounting Plate is for installation into the OnQ 14”, 28” and 42” Tri-rail or Flat-rail Service Center Enclosures.
2. Description:
The OnQ Caddx Mounting Plate allows the Caddx Networkx NX-8 Security System to be utilized in an OnQ
Structured Wiring System. The Mounting Plate also allows for the placement of expander modules.
3. Installation
A. Mounting Caddx NX-8 and Expander Modules.
1) Slide NX-8 Main Control Module into mounting plate slots. See Figure 2.
2) Secure Vertical Expander Module Rails to Mounting Plate. Slide Modules into Vertical Rails.
3) Use Caddx Installation/Instruction Sheets for correct wiring instructions.
Figure 2