Legrand 40N2 Series CableSmart Nonmetallic Surface Raceway System - Manual

1 – 40N2B08, 60N2B08
2A – 40N2C08
2B – 60N2C08
3 – 40N2FWC, 60N2FWC
4 – 40N2F05, 60N2F05
5A – 40N2F06
5B – 60N2F06
6 – 40N2F11, 60N2F11
7 – 40N2F15, 60N2F15
8 – 40N2F17, 60N2F17
9 – 40N2F18, 60N2F18
10 – 40N2F19, 60N2F19
11 – 40N2F20, 60N2F20
12 – 40N2F21, 60N2F21
13 – 60N2F8R, 60N2F8L
14A – 60N2F32
14B – 40N2F31
15 – MXN2F21
15A – MXN2A08
16 – 40N2F74, 60N2F74
17 – PSB1
18 – PN03, PN05, PN10, PN20
CableSmart ™ 40N2 & 60N2 Series
Nonmetallic Surface Raceway System
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 42138R2 – Updated July 2005
Wiremold Electrical Systems conform to and should be
installed and properly grounded in compliance with
requirements of the current National Electrical Code,
Canadian Electrical Code, or codes administered by
local authorities.
All electrical products may represent possible shock or
fire hazard if improperly installed or used. Wiremold
electrical products are UL listed, made for interior use
only, and should be installed in conformance with
current local and/or the National Electrical Code.
Recommended Cutting Tools & Fasteners*
Herramientas de corte y sujetadores recomendados**
Outil de coupe et attaches recommandés***
Miter Saw
Use una sierra de ingletes
Scie à onglet
Use a #8 [5/16", 7.9mm Head Size] Pan Head Screw or equivalent.
Use un tornillo de cabeza redonda N° 8 (con cabeza de 7.9mm [
5/16"] o equivalente.
Utilisez une vis BER n°8 (tête do 7,9mm [5/16 po]) ou équivalent.
* Not supplied.
** No se incluye(n).
*** Non fournis.
j
LISTED
15
2B
13
5B
12
9
2A
4
5A
10
14A
1
14B
14B
6
7
3
8
11
16
18
17
15A