Legrand FP Series Activation Covers - Manual (Page 6)

6
3. Attach Fitting and Conduit to Cover Plate. Pull wire &
cables and mount Cover Plate to Trim Ring.
4. Installation complete.
FURNITURE FEED ACTIVATIONS – FPFF SERIES (continued)
1. Cat. No. S3AXBP
For abandonment, remove Cover Assembly and install
1/4" [6.4mm] Steel Plate using four Leveling Screws
provided. Top of Plate should be flush with finished Floor.
Apply a bead of silicone caulking around the Bottom
Plate to prevent any water or debris entry.
2. Place 1/8" [3.2mm] aluminum Top Plate over the
Bottom Plate. Install the four Screws provided to
secure the two Plates.
ABANDONMENT
1. Cat. Nos. PKCAP & NRGCAP
For permanent abandonment, remove Cover Assembly
and replace with Mud Cap. Repair the Floor Opening
using a suitable Grout or Concrete fill.
PERMANENT ABANDONMENT
Keep Screw Plug
for abandonment
Flexible
Conduit
Thread Conduit
Fitting into Plate
CAUTION: Tighten Mounting Plate Screws securely
to maintain system ground continuity.