Legrand 6B21E User Manual
Page 3
RECOMMENDED MOUNTING INSTRUCTIONS - Remote Display:
All “-RAM” models contain a remote display unit which can be mounted in a 1U rack mount face plate. To install remote display,
remove black insert and push pins from the rack mount face plate to clear the desired display location. Use a flat screw driver to
gently pry up the push pin head followed by the push pin body so they are not separated.
Line up the remote display unit with the cleared holes in the rack mount face plate and insert the push pins through the pin holes
as indicated. Once secured, install the face plate into your 19" [482mm] rack via the closed slots.
Remote Display
Push Pins
Insert
Rack Mount
Face Plate
(Closed Slots
for Rigidity)
Designed in Accordance
with E. I. A. Standards
MOUNTING TYPES - Snap-On/ Slide-Off:
Mount unit in any position. Catalog No. 8004 includes two aluminum mounting
clips that snap onto mounting rails on the back of the unit. Screws also included.
Used for all units with 2" [51mm] aluminum housing.