Legrand RC3 Receptacle Replacement - Manual (Page 5)

5
Circuit “A” Circuit “B”
Line Black Red
Neutral White White w/Blue Stripe
Ground Green Green w/Yellow Stripe
Electrical Wiring Chart
CAUTION: Letter indicators
need to be lined
up for correct
circuit identification.
CAUTION: Ground wire from junction box must be
connected to SYSTEM GROUND.
CAUTION: Receptacle mounting means not grounded.
Grounding wire connection required. For
isolated ground wiring, connect ground
leads to a separate isolated grounding
conductor. See NEC250-146(d).
Circuit “B”
Circuit “A”
Two Screws Provided
Step 9 Place slide holder on assembly lining up the “A”
and “B” indicators on the trim ring and the slide
holder. Fasten with two screws provided.
Step 10 Make electrical connections in junction box
according to wiring diagram.
NOTE: Factory supplied junction box shown. Junction
boxes must be located in an accessible location.
Poke-Thru devices with an “LJB” or “LJB25”
suffix are supplied without a junction box
(supplied by others).