Legrand RFB Series Floor Boxes - Manual (Page 6)

WIREMOLD
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721
1 007 256R2 0112 © Copyright 2009 Legrand/Wiremold All Rights Reserved
Step 14. RFB6 Floor Box used in wood floors.
Determine box location and orientation. Cut a
6" [152 mm] x 7 1/4" [184 mm] opening in
wood floor centered over desired location.
Align plastic trim ring on top of box with opening
in floor, and secure box to underside of floor
with four (4) #8 or four (4) #10 pan head sheet
metal screws, (not supplied by Wiremold),
through the four (4) holes provided in cover.
Continue installation following previous instructions. Complete procedure by installing a FloorPort ™
Series Activation (sold separately), using the installation instructions provided with that unit.
(4) tab on each
corner of upper plate
Cut a 6" [152mm] x 7 1/4"
[184mm] opening in wood floor
(4) sheet metal screws
(not included)