Legrand FP-CTR - Manual (Page 2)

2
Attach FP-CTR flange and cover using the four (4) #10-24 screws provided.
2
efbff series PK Presets series Rfb2 series
Screed concrete level with the top edge of flange
and cover.
3
After the concrete has set, remove the
four (4) #10-24 screws, covers and shims.
4
Complete activation by replacing cover with
FloorPort Series Covers (sold separately) and adjust
height of cover using the provided shims to ensure
that cover is flush with the flange edge.
5
note: Rfb2 series shown. fP-ctR also works with
Rfb4 and Rfb 6 series floor boxes.
note: fPfftc cover shown in illustration. fP-ctR
trim Ring also works with floorPort series
covers fPctc and fPbtc.