Legrand CRFB Series Floor Box - Manual (Page 2)

5. Tighten mounting screw until steel anchor is adjusted
securely below floor.
6. Install the floor covering prior to attaching the cover.
For carpet installations, the temporary cover plate can
be used as a template.
Steel
Anchor
Cut Carpet along
Temporary Cover Edge
7. Attach cover to box. Remove the appropriate shelf pad
tab, exposing the threaded attachment hole. Secure
cover to box with screws provided.
Cover Mounting
Shelf Pad
Remove this Tab
Section to attach
8CT Cover
Remove this Tab
Section to attach
CRFB Cover
8. CRFBBTC and CRFBCTC COVERS: Open the lid and
insert Cover Attachment Screws through Sealing
Washers and attach Cover Flange to CRFB4 Box.
Attachment
Screw
Sealing
Washer
CAUTION: CRFB4 Floor Box has two sets of Cover
Attachment Holes. Use the attachment holes
furthest away from the mounting screw.
4. Flip locking anchor up and lower box into opening.
Mounting Hole
Remove this Tab
Section to mount
CRFB Covers
9"
[229mm]