Legrand CCWB Series Wall Boxes User Manual
Page 2
![background image](https://www.manualsdir.com/files/794348/content/doc002.png)
Step 2
Install wall box into wall box frame and secure using #10
wood screws.
Step 3 Remove electrical and data panels.(If supplied with
Box) Remove knockouts where required. Attach conduit for
power and data cables using UL Listed components. All
openings and unused knockouts must be closed or sealed off
during final installation with UL Listed components. Re-install
electrical and data panels.
Step 4 Install cover assembly over wall covering using spacer/latch plate and supplied hardware.
This manual is related to the following products:
- WKD ProSeries Underfloor Duct Opening Reducer 880CM1-1 880CM2-1 880CM3-1 880CS1-1 880CS1-NA 880CS2-1 880CS2-NA 880CS3-1 880CS3-NA 880M1 880M2 880M3 880S1 880S2 880S3 828MAAP PCIQ PDU-TS1 Temperature Sensor WKD ProSeries Underfloor Duct Nonmetallic Fittings 525 Series Service Fittings RC7AP AMD8 Abandonment Plugs AV3ATCBK AV3ATCGY AV3ATCVY AV3ATCAL AV3ATCBS AV3ATCAA AV3ATCAB