Legrand CCWB Series Wall Boxes - Manual

INST-CCWB-001
Wiremold/Walker
®
electrical systems conform to and should
be properly grounded in compliance with requirements of the
current National Electrical Code or codes administered by
local authorities.
Typical CCWB Series Wall Box
INSTALLATION INSTRUCTIONS
All electrical products may present a possible shock or fire
hazard if improperly installed or used. Wiremold/Walker
electrical products may bear the mark as UL Listed and/or
current local and/or the National Electrical Code.
Products Covered:
Classified and should be installed in conformance with
Wall Box Cat. No.: CCWB
IMPORTANT: Please read all instructions before beginning.
CAUTION: Do not operate resurfacing equipment over surface of covers. This may result in damage to the surface finish of the
product.
CAUTION: Box has no after set adjustment.
Step 1 Build and position wall box frame in accordance with wall
plans or blueprint. Note: Wall box frame size will depend on wall box
dimensions. Please consult factory for correct dimensions.