Legrand 152CHA User Manual
Page 5
5
Step 2
Remove Poke Thru from floor by bending
tabs inward and pulling unit up.
Step 1 Remove cover assembly from Poke Thru by
removing (2) 8-32 screws and lifting cover off.
CONFIGURING FEED PLATES
Step 4
Use (4) 8-32 screws to install new feed plate
or housing.
Step 3 Remove (4) 8-32 screws and pull off
feed housings.
CAUTION: To maintain fire classification, Feed Plates
must be installed.
This manual is related to the following products:
- 15FFHA 6ATCFFBK 6ATCFFGY 6ATCFFNK 6ATCFFBS 6ATCFFBZ 880ADP FITFIT Multi-Service Poke-Thru Device Abandonments AP-FITTCFIT Multi-Service Poke-Thru Device Abandonments 221-21CARPET FIT Multi-Service Poke-Thru Device Abandonments 221-21TILE FIT Multi-Service Poke-Thru Device Abandonments RC9-PPT RCAPFFTCBK RC9AFFTC v.1 6ATC 8AT 6PPS 68REC 68REC-25 6PPS 8 5PTHA 575CHA 175CHA-LJB 1BHA 1BLH 175CHA 5BLH 1PTHA 1125CHA 682A 682A-PT 6S2 6ACT8A 6TRAC 6MAAP2A 6MOSBS 6DEC 6DP 6MOS 6B 6AAP 68B 6SER 6MAAP 6S1 68MAAP