Huawei Mate 9 - Manual (Page 171)

4
Select the button that you want to auto-learn.
5
When prompted, align the infrared sensor at the top of the phone with the infrared emitter on
the physical remote. Both devices should be within 5 cm (2 inches) of each other. On the
physical remote, press and hold the button you want to auto-learn for at least two seconds.
6
If auto-learn is successful, the Save button at the bottom of the screen will become available.
Touch this to save the IR code and continue adding other buttons.
7
Repeat steps 4, 5, and 6 to configure other buttons.
8
Touch > OK to save the remote.
Using Smart Controller
After adding remotes, open Smart Controller and select the remote for the appliance you want
to operate. To use a remote, first point the infrared emitter on your phone at the appliance. The
appliance must be within range and in direct line of sight.
If the appliance does not respond to one of the buttons on the remote, touch the icon at
the top of the screen. Select the unresponsive button and follow the onscreen instructions to
re-learn it.
Managing remotes
You can pin, edit, rename, or delete Smart Controller remotes. You can also enable or disable
keypress sounds and vibrations.
Pinning, editing, renaming, or deleting a remote
1
Open Smart Controller.
2
Touch and hold a remote. You can then Delete, Rename, Pin to top or Edit it.
l
You cannot pin a remote if it is already at the top of the list.
l
You cannot edit air conditioner remotes.
Configure keypress sounds
1
Open Smart Controller.
2
Touch to open the Settings interface. You can switch Keypress sound and Keypress
vibration on or off.
Sound recorder
Recording sound
Use the Recorder app to record sound in a variety of different scenarios, such as meetings,
interviews, or your own voice.
1
Touch Sound Recorder.
Tools
165