Ivoclar Vivadent Vectris - Manual (Page 34)

34
Vacuum-forming the Vectris Single – Version B
Application of Vectris outside the Vectris VS1 framework former: Remove the Vectris Single from the light-protected
package and place it on the die with tweezers. Place the Transil matrix on the Vectris Single in the correct position, push it
downwards and mount the die on the model carrier of the Vectris VS1.
Remove the Vectris Single from the light-protected package and place it on the sealed die.
Place the Transil matrix over the Vectris Single and press it downwards.
Position the die with the Transil matrix in the VS1. Start the vacuum-forming and
polymerization process. The program takes 10 minutes to complete.