Ivoclar Vivadent Vectris - Manual (Page 14)

14
D E S C R I P T I O N O F A S S O R T M E N T S
Vectris Kit
Vectris Single
Vectris Single is suitable for fabricating frameworks for anterior and
posterior crowns.
Vectris Pontic
Vectris Pontic is employed to create cusp-supporting pontics or to
reinforce the cusps in single crowns. Vectris Pontic is characterized
by high flexural strength. As the pontic is wrapped in foil, it can be
easily measured out and cut to size. These strips, when cut, are fitted
into the Transil matrix one by one.
Vectris Frame
Vectris Frame is wrapped around the cusp-supporting pontic and
bridge abutments. This technique results in a bridge framework with
having physical properties. The flexible structure of Vectris Frame
evenly distributes the masticatory forces on the bridge and increases
the torsional resistance.
Delivery form
Vectris Kit
– 4x4 Vectris Single
dimensions: diameter: 24 mm
– 2x2 Vectris Pontic
dimensions: length: 150 mm
– 4x4 Vectris Frame
dimensions: length: 40 mm; width: 25 mm
– 3x 2 ml Vectris Glue
– 1x 5 ml Vectris Wetting Liquid
– 1x 25 Vectris Foil
– 1x 10 ml Vectris Model Separator
– Vectris Pliers
– 2x 50 ml Transil Cartridge
– 12 Mixing Tips