Ivoclar Vivadent Vectris - Manual (Page 15)

15
PRODUCT
INFORMA
TION
Vectris Glue
Vectris Glue holds the Vectris material in place in the Transil matrix
until the vacuum-forming process is carried out and serves as an
additional aid to adaptation.
Vectris Wetting Liquid
The wetting liquid is applied to condition the fully completed
surfaces of Vectris frameworks in order to achieve an effective bond
to the following Vectris material and the SR Adoro Liner.
Vectris Model Separator
The Vectris Model Separator is suitable for separating working dies
during the fabrication of metal-free restorations and adjoining stone
surfaces during composite veneering.
Vectris Foil
The foil reduces the formation of an inhibited layer during the light-
curing process and, consequently, enables the framework material to
cure completely. The foil is only used for applications without Transil.
Vectris Pliers
These pliers are used to cut Vectris Pontic to size.
Transil
Transil is utilized to manufacture reproducible, cusp-supporting
Vectris frameworks. This silicone enables users to design frameworks
according to the classic metal-ceramic technique. Transil offers easy
and fast handling properties. The disposable mixing tips are used to
mix the two components to a homogeneous mixture. Cusp-
supporting, anatomically designed Vectris frameworks provide
increased strength and reduce the risk of delamination.
Dispenser
The dispenser is suitable for Ivoclar Vivadent materials that are mixed
in a 1:1 ratio (e.g. Gingitech, Virtual, etc).