Uses, Cad/cam partners – Ivoclar Vivadent Telio CAD A16 User Manual
Page 6
![background image](https://www.manualsdir.com/files/791332/content/doc006.png)
6
Uses
Indications
Fabrication of temporary restorations by means of CAD/CAM technology
Contraindications
– Use for permanent restorations
– Bruxism
– Failure to observe the requirements stipulated by the implant manufacturer for using the selected
implant type (diameter and length of the implant must be approved for the respective position in the
jaw by the implant manufacturer)
– Failure to observe the permissible maximum and minimum Telio CAD layer thicknesses
– Use of a luting composite other than Multilink Hybrid Abutment HO 0 for the cementation of Telio
CAD to the Ti base
– Intraoral cementation of the Telio CAD structure to the Ti base
– All uses not stated as indications are contraindicated.
Important processing restrictions
– Processing of the blocks with non-authorized CAD/CAM systems
– Failure to observe the manufacturer's instructions regarding the processing of the Ti base
Side effects
If the patient is known to be allergic to any of the components, Telio CAD and the other materials
necessary for the fabrication should not be used.
Composition
– Telio CAD
Components: Poly(methyl methacrylate) (PMMA), pigments
– Multilink Hybrid Abutment HO 0
Components: Dimethacrylate, HEMA as well as fillers (barium glass, ytterbium trifluoride, spheroid
mixed oxide and titanium dioxide)
– SR Connect
Components: Methyl methacrylate, polymethyl methacrylate, dimethacrylates and initiators
Warnings
– Do not inhale grinding dust.
– SR Connect contains methyl methacrylate (MMA). MMA is highly flammable. Therefore, keep away
from sources of ignition and do not smoke. MMA is an irritant and is irritating to eyes, respiratory
organs and skin. Do not inhale vapours.
– The safety notes on the individual primary packaging and labels have to be observed.
CAD/CAM partners
Telio CAD has to be processed with an authorized CAD/CAM system. For questions regarding the
different CAD/CAM systems, please contact the respective cooperation partners.
Further information is available on the Internet from www.ivoclarvivadent.com.