Ivoclar Vivadent Telio CAD A16 - Manual (Page 5)

5
Material
Telio CAD
Telio CAD are cross-linked PMMA blocks for the fabrication of long-term temporaries by means of the
CAD/CAM technique. As a result of the industrial polymerization process, the blocks feature a high material
homogeneity. Polymerization shrinkage or inhibition layers no longer have to be taken into consideration.
Given the CAD/CAM fabrication, the temporary can be easily reproduced at any time. Stains and/or layering
materials can be used to apply final esthetic optimizations.
Physical properties
Test method Specifications Example values
Flexural strength MPa EN ISO 10477 ≥ 100 128
Flexural modulus MPa EN ISO 10477 ≥ 2800 3041
Water absorption µg/mm 3 EN ISO 10477 ≤ 40 22
Solubility µg/mm 3 EN ISO 10477 ≤ 7.5 0
Ball indentation hardness MPa Internal method
(358N, 30s) – 176
Ti base
Ti bases are used for the fabrication of Telio CAD Abutment Solutions. The suitable Ti bases are selected in
accordance with the CAD/CAM system used. Please observe the instructions for use and processing of the
respective manufacturer.
Further information about the authorized CAD/CAM systems is available on the Internet from
www.ivoclarvivadent.com.