Ivoclar Vivadent Telio CAD A16 - Manual (Page 4)

4
Description
Telio ® CAD A16 are CAD/CAM-fabricated implant-supported hybrid restorations for individual, temporary single-
tooth reconstructions. The material consists of a cross-linked polymer block (PMMA), enabling the fabrication of
individual, monolithic hybrid abutment crowns which are directly cemented to a Ti base. Shape, esthetics and
emergence profile can be easily designed and adjusted any time. Telio CAD A16 thus represents the basis for
the subsequent permanent restorations with IPS e.max
® CAD Abutment Solutions and IPS e.max Press
Abutment Solutions.
Hybrid abutment crown
Hybrid abutment crowns are characterized by combining abutment
and monolithic crown in one piece. This is an efficient two-in-one
solution made of PMMA, which is directly cemented to a Ti base.
Shape, esthetics and emergence profile can be easily designed and
adjusted any time. For cases with immediate stress-bearing, a CAD/
CAM-milled instant temporary can be fabricated. For this purpose,
Telio CAD convinces users with its usual esthetic properties and
sufficient strength, durability and efficiency.
The monolithically milled hybrid abutment crown is extraorally
cemented to the Ti base by means of Multilink Hybrid Abutment HO 0.
Then, the restoration is screwed onto the implant – in one piece.
Finally, the screw channel is sealed with a composite (e.g. Tetric
EvoCeram
® ) or a light-curing temporary restorative material (e.g. Telio CS Inlay / Onlay).
Ideally coordinated – Multilink ® Hybrid Abutment HO 0
The auto-curing Multilink Hybrid Abutment composite cement together with SR Connect and Monobond ® Plus are used for
the cementation of Telio CAD on adhesive bases made of titanium / titanium alloys.
This allows
– reliable adhesion due to high adhesion values;
– easy handling due to the convenient Automix syringe.
Telio
®
CAD Abutment Solutions
Product Information
Telio CAD
Hybrid abutment
crown
Telio CAD
(PMMA)
Ti base