Harken 7801 4-Point Storage System - 60 lb - Manual

1
7801: 60 lb (27 kg) system
7802: 90 lb (41 kg) system
7803: 145 lb (66 kg) system
7806: 200 lb (91 kg) system
SAVE TIME! READ THE ENTIRE MANUAL BEFORE BEGINNING HOISTER INSTALLATION.
Harken, Inc. • N15W24983 Bluemound Rd, Pewaukee, WI 53072-4974 • Tel: 262-691-3320 • Fax: 262-701-5780• Email: [email protected] • Web: www.hoister.com
IMPORTANT SAFETY INFORMATION
• NEVER USE TO LIFT A PERSON
• DISABLE AUTOMATIC GARAGE DOOR OPENER
when installing, raising, or lowering Hoister.
• READ ENTIRE MANUAL CAREFULLY BEFORE
starting installation. It will save you time.
• DO NOT UNTIE ANY ROPES
System comes ready to install.
Leave F, G, and H together.
• DO NOT RAISE OR LOWER HOISTER
with anyone standing under object.
*NOTE: (G) Block and tackle varies
by system size. Refer to Hoister
part number for specific cleat style.
**NOTE: (H) and (F) ropes in 12'
(3.6 m) and 16' (4.9 m) ceiling
models have different part numbers.
Pulleys
224A
Pigtail lag screws
HCP1444
Lag bolts
HFS908
Organizer pulleys
H-52010
Organizer plates
H-28375A
Block and tackle*
Webbing straps with buckles
HCP1459.SET
Single black/red hoisting rope
HCP1483** Washers
HFS913
Shackle
072
Drop black ropes
HCP1447/HCP1448**
7806
7803
7802
Rope organizer components
7801
WARNING! Strictly follow all instructions to avoid an accident, damage to property,
personal injury, or death. See www.harken.com/manuals for additional safety information.
WARNING! Do not use this product for human suspension. Components can fail causing person to fall,
possibly resulting in serious injury or death.
(G1) Cleat 7757ASSY
(G1) Cleat 7753ASSY
DO NOT UNTIE
DO NOT UNTIE
(G1) Cleat
7754ASSY
229/234A
228A
226A
225A
TOOLS
Drill Plumb line Safety glasses
Drill bits:
5 /
32
" (4 mm)
7 /
32
" (5.5 mm)
5 /
16
" (8 mm)
Pencil Tape measure
Stud finder Wrench (box end or
ratcheting)
7 /
16
" (11 mm) Stepladder
B
D
Welded screw eye
HCP1443
A
C
H
I K
J
L
E
F
G
KIT INCLUDES
A 1 welded screw eye
B 4 pigtail lag screws
C 1 shackle
D 4 pulleys
E 2 webbing straps with buckles
7' (2.13 m)
F 1 single black/red hoisting rope
G 1 block and tackle with
cleat (G1) and rope
H 4 black drop ropes: 2 long, 2 short
I 4 lag bolts 1 /
4
" x 2 1 /
2
" (6 x 63 mm)
J 4 washers 1 /
4
" (6 mm)
K 2 organizer plates
L 2 organizer pulleys
PURCHASE SEPARATELY IF NEEDED
See “note” Step 1B, page 6.
1 pine board (riser) (grade 2)
2" x 6" x 7" (50 mm x 152 mm
x 180 mm). Do not use for rafters
running sideways.
2 pine boards (grade 2) 2" x 6" x 6'
(50 mm x 152 mm x 1.83 m)
8 lag bolts and washers 5 /
16
" x 4"
(8 x 100 mm)
PURCHASE ADDITIONAL FOR RAFTERS
RUNNING SIDEWAYS
See Step 2A, page 7.
1 pine board (grade 2) 2" x 4" x 6'
(50 mm x 100 mm x 1.83 m)
2 lag bolts and washers 5 /
16
" x 3 1 /
2
"
(8 mm x 90 mm)