Grandstream GXV3611IR HD User Manual - Manual (Page 8)

Grandstream Networks, Inc. GXV3611IR_HD User Manual Page 8 of 64
Firmware Version 1.0.3.5 Last Updated: 11/2014
S AFETY C OMPLIANCES
These instructions are intended to assist users to safely operate the GXV3611IR_HD, avoid dangerous
situations or damage the device.
Warning:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with DC 12V according to the IEC60950-1 standard. Please refer to the
technical specifications for more details. Do not use a third-party power adapter or power
cord. When the device installed on the wall or ceiling, make sure that it is firmly attached.
Caution：
 Make sure that the power supply voltage is correct before using the
camera.
 Do not drop the device or expose it to physical shock.
 Do not expose the device to temperatures outside the range of 0 oC to 45oC when the
device is in operation.
 Do not expose the device to damp/wet conditions or high electromagnetism radiation.
 To avoid heat accumulation, make sure that your operating environment has proper
ventilation.
 Do not damage the warranty sticker.
A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according
to their average lifetime. The average lifetime varies from the differences between operating
environments and usage history. Regular maintenance checks are recommended for all users.
Please contact your dealer for more details.
Warning
： May cause serious injury or death if any
of the warnings below are neglected.
Caution： Equipment may be damged if any of the
following caution messages are neglected.