Grandstream GXV3611IR HD User Manual - Manual (Page 33)

Grandstream Networks, Inc. GXV3611IR_HD User Manual Page 33 of 64
Firmware Version 1.0.3.5 Last Updated: 11/2014
NOTE:
 H.264 suggested if camera needs to be viewed via Internet.
 The definition of Baseline, Main Profile and High profile of H.264 please refer to:
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC
 If MJPEG selected, reduce max. frame rate to min. value to save bandwidth and get better image
 Grandstream IP Camera provides two video streams, user can use them with flexibility. For example,
the high-resolution stream for local recording; another low or high resolution for remote monitoring; or
vice versa depending application scenarios.
 Use below link to calculate bandwidth and storage before installation
http://www.grandstream.com/support/tools/bandwidth-storage-calc
Figure 11-2: Video & Audio Settings Page
 Audio Settings:
.
o
Preferred Audio Codec:
PCMU, PCMA, AAC supported. Audio also can be disabled.
o
Microphone Volume:
Slide to adjust microphone gain.
o
Speaker Volume:
Slide to adjust the speaker volume connected.
o
Line In:
Select Internal (microphone) or External audio input path.
o
Line Out: Select Internal (speaker) or External audio output path.

Light Condition: Select correct light condition for the scene monitored: Outdoor,
Indoor 50Hz power frequency (Europe, China, etc.) or 60Hz
power frequency (US, Japan, etc.). Wrong setting will affect
image quality under fluorescence light condition.