Gxv3611ir_hd – Grandstream GXV3611IR HD User Manual User Manual
Page 29

Grandstream Networks, Inc.
GXV3611IR_HD User Manual
Page 29 of 64
Firmware Version 1.0.3.5
Last Updated: 11/2014
GXV3611IR_HD
H
OME
W
EB
P
AGE
Figure 8: Home Page of GXV3611IR_HD
1.
Real Size/Window Size icon:
Click to switch between real resolution size and embedded window size video.
2.
ZOOM:
Zoom in or Zoom out during ePTZ operation (Not Applicable).
3.
BRIGHTNESS bar:
Adjust the image or video brightness.
4.
CONTRAST bar:
Adjust the image or video contrast.
5.
SATURATION bar:
Adjust the image or video saturation.
6.
Language icon
Click to switch webpage language.
(Current support: Chinese, English and Russian)
7.
Configuration icon:
Click to enter “Configuration Page” to configure the parameters of
GXV3611IR_HD (Administration privilege required).
8.
Default Video Parameter icon:
Click to reset video parameters (Brightness, Contrast, Saturation) to default.
9.
Stop/Play Video icon:
Click to Stop and Play the embedded live video.
10. Capture (Snapshot) icon
Click to capture and save a snapshot of current displayed video frame.
Default directory: C:\Capture, using date stamp as folder name.
11. Record icon:
Click to Start/Stop record of current video stream into a file.
Default directory: C:\Record
12. Listen On/Off icon:
Toggle to listen/stop audio from the camera’s microphone
13. Talk On/Off icon:
Toggle to talk to camera’s speaker (computer microphone required)
14. Playback:
Click to playback the recorded video file.
15. Local Configuration:
Click to configure the file path of snapshot and recorded video files.
Also adjust the video delay or smoothness.
16. Motion Detection Alarm Indicator:
If (configured) motion detection alarm triggered, the indicator will flash in
red
.
Click the indicator icon to turn off the alarm indication.
17. DI, Alarm_In icon:
The indicator will be on when there is an external Alarm Input.
Click the indicator icon to turn off the alarm indication.
18. DO, Alarm_Out icon:
Click the indicator icon manually switch the Alarm_Out operation.