Gasboy EDS-CCIS Credit - Manual (Page 8)

2 EDS/CCIS Credit & Debit Card Networks
Gasboy CFN Series
System Setup
System Parameters (SYS_PAR)
This information is provided for reference only. The menu programs initialize and/or stores the appropriate
values for you in the system parameters.
Reader verification - page 4
Use remote verification (reader): Credit
Use local verification (reader): Club
Check mod 10 (reader): None
Check expiration date (reader): Credit (and optionally club)
Console verification - page 5
Use remote verification (reader): Credit
Use local verification (reader): Club
Check mod 10 (reader): None
Check expiration date (reader): Credit (and optionally club)
Serial port configuration - Page 8
Host handler channel: The number of the port used for communicating with the network. This is the same
port you connected to the modem.
Host router data: Use for your EDS/CCIS truck stop number.
More router data: Two-digit price level to use for refrigerated-trailer-fuel transactions.
Host Handler Baud Rate: The communications baud rate received from your EDS/CCIS representative.
Send requests to host handler: Credit
Host handler data: Two two-digit numbers; the default numbers are 00 and 20. Enter the numbers by typing:
00 20
(Repeat as needed to exit host handler data.)
The first two digits are 00 if your modem is a Hayes 1200, 01 if your modem is a Hayes 2400, and
02 if it is a Hayes Optima.
The second two-digit number is a hexadecimal value for the number of seconds to allow for the
carrier to be received. The default 20 sets it for 32 seconds. Setting it for 10 would make it 16
seconds, 18 would be 24 seconds, 28 would be 40 seconds, and 30 would be 48 seconds.
Transaction miscellany - page 11
Verification timeout: 0 seconds (no timeout).
ENTER ENTER ENTER
ENTER