Gasboy M12158A004 - Manual (Page 4)

Page 4 MDE-4998B Main Display Assembly (M12158A004) for Atlas® 9800 · August 2014
Installing Solid White Diffuser Display (M11841A001) Installing Solid White Diffuser Display (M11841A001)
Installing Solid White Diffuser Display (M11841A001)
WARNING
Always remove AC power from the pump/dispenser before servicing the unit. Failure to
turn off the unit before servicing may result in serious injury or death.
To install the solid white diffuser display on the Atlas 9800 Main Display Assembly
(M12158A004), proceed as follows:
1 When the Atlas 9800 main display assembly is used with the Sale Backlight and Printed
Circuit Board (PCB) Assembly (C06372) and Light Emitting Diode (LED) Backlight 9800
Reflector (C35399), place the solid white diffuser display on the front side of the display board
between the Liquid Crystal Display (LCD) and PCB as shown in
Figure 1 .
Figure 1: Placing Solid White Diffuser Display
Display Board
Solid White Diffuser Display
(M11841A001)
LCD Display
2 Secure the LED backlight 9800 reflector and solid white diffuser display to the display board
using the Nylon Mounting Buttons (Q13701-01).
Figure 2: Securing LED Backlight 9800 Reflector and Solid White Diffuser Display
(ii)
Nylon Mounting
Button (Q13701-01)
LCD Display
Solid White Diffuser
Display (M11841A001)
LCD Display
Nylon Mounting Button
(Q13701-01)
LED Backlight 9800 Reflector
Solid White Diffuser
Display (M11841A001)
(i)