Installing the atlas battery heater kit, Preparing for the installation, Installing the atlas battery heater kits – Gasboy Battery Heater Kits User Manual
Page 5: 1 unlock and remove the front panel
MDE-4555 Atlas™ Battery Heater Kits (M06897K00X) Installation Instructions · March 2006
Page 5
Installing the Atlas Battery Heater Kit
Installing the Atlas Battery Heater Kit
Preparing for the Installation
1
Request permission from the manager/owner to turn off the circuit breakers for MICRO,
LIGHTS and FEED. Perform the lockout/tagout safety procedures.
2
Ensure that you have the proper kit for the model unit to be retrofitted.
3
Follow all applicable safety rules and procedures.
Installing the Atlas Battery Heater Kits
1
Unlock and remove the front panel
Unlock
Bezel Screws (behind front panel)
.
2
Remove the two screws securing the bezel assembly and remove the assembly.
3
Remove the two screws securing the display panel and pivot display panel down. The unit will
swing forward and down after screws are removed.
Screws
4
Locate and identify the following parts in the Heater Kit:
Part Number
Description
M05120A001
M05120A002
Cable Assembly, 120 VAC Heater
Cable Assembly, 240 VAC Heater
Relay
M00959B010
Flat Washer