Gasboy 9120 Pulser User Manual
Page 3
032006 Rev. 9223
Page 3
Refer to the following diagram for Steps 17-31.
17. Remove cap from totalizer drive and install cotter pin.
18. Install drive shaft 054827 to pulser with cotter pin.
19. Install bracket to pulser with screw 051790 and washer 068891.
20. Remove red thread protector cap from pulser and wires.
21. Install 025015 elbow into pulser (grease threads).
22. Install 025045 elbow to 025015 elbow (grease threads)
23. Install 015451 pulser bracket to gear train with three 053625 screws.
24. Assemble 021372 conduit to 025045 elbow (grease threads).
25. Assemble 066400 conduit union to 021372 conduit (grease threads).
26. Assemble 021058 conduit fitting to 066400 conduit union.
27. Assemble 003340 J-box to 021058 conduit fitting.
28. Assemble 003515 J-box cover to 003340 J-box.
29. Assemble 022050 conduit to 003340 J-box.
30. Assemble 039130 nut to end of 022050 conduit.
31. Assemble 021986 coupling to 022050 conduit.