Gasboy 9800A - Manual (Page 3)

032093 Rev. 7261 Page 3
Install Totalizer
10. Remove existing hardware from totalizer window on side of unit. Set
aside for later use or replace.
11. Install new totalizer assembly with existing hardware or supplied
hardware. (See Totalizer Detail).
12. Install cable assembly (017366, single or 017365, twin) with spirol pin
to odometer assembly.
Totalizer Detail
13. Install other end of cable assembly (with larger mounting hole)
to appropriate gallon or liter shaft on gear train using cotter pin
042290. (See Platform and Gear Train).
14. Attach 0M0042 tie-wrap around plastic cable cover and
through odometer bracket.
15. Attach cable to DC conduit using C08126 tie-wrap. Allow
some slack in both ends of the cable to prevent premature
breakage during operation.
Platform and Gear Train
16. Install new program IC C06426 into socket U18 of CPU PCB.
CPU PCB Pulser Connector and IC Locations