Gasboy M08400 - Manual (Page 2)

Introduction
Page 2 MDE-4740B Atlas™ Bezel Upgrade Kit (M08400K001) Installation Instructions · February 2010
Required Tools
The following tools are required for the installation of the kit:
• Phillips ® Screwdriver
• Flat Blade Screwdriver
• Scissors or Utility Knife
Parts List
The following table lists the parts included in the M08400K001 kit.
Item Description Part Number Quantity
1 Wiper Gasket M08340B001 1
2 Atlas Bezel Assembly M08400A001 1
3 Gasket 1/4 X 1/2 X 1 Q11899-21 2
4 Gasket 1/4 X 1/2 X 25.7 Q11899-22 1
5 Gasket 1/4 X 1/2 X 3.15 Q11899-23 2
Note: This is a configured kit; dial face graphics and brand panel graphics must be ordered
with this kit.
The following table lists the parts included in the M08685K001 kit.
Note: The M08685K001 is intended for replacing the Gaskets in the Atlas Bezel. It does not
include the Atlas Bezel Assembly.
Item Description Part Number
Quantity per
Dispenser
1 Wiper Gasket M08340B001 2
2 Screw, Thread Forming Pan M04287B001 4
3 Gasket, Upper Housing M05095B001 4
4 Gasket 1/4 X 1/2 X 1 Q11899-21 4
5 Gasket 1/4 X 1/2 X 25.7 Q11899-22 4
6 Gasket 1/4 X 1/2 X 3.15 Q11899-23 2
Warranty
For information on warranty, refer to MDE-4255 Gasboy’s Warranty Policy Statement. If you
have any warranty-related questions, contact Gasboy’s Warranty Department at its Greensboro
location.