FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 81)

LIT1368E Flex Training Manual
Page | 81
32600 LIT1368F
sending a new one.
Counters
First let’s look at how counters and flags are used. In this example we will be doing a very
simple command set which will set a counter to increment by 1 each time the button is
pressed, and then once the counter equals 5 we will have the flex panel beep once, go to the
splash screen, then wait there for 2 seconds, and then return to the Home screen and zero
out counter 1.
Select Button C on the TEST screen.
Now click on the Counters action command.
Select counter
Select COUNTER 1 and then select increment and put in a value of 1.