FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 106)

LIT1368E Flex Training Manual
Page | 106
32600 LIT1368F
Log Command
This is a feature that is not a usable function on the Flex Panels for end users. It is here to
be used with a companion program called FLEX Manager. Within the FLEX Manager,
reports can be generated by the fields entered below and a log file can be maintained which
can report on number of button pushes, duration of use of a projector for example and
further uses of FLEX Manager include Lamp Life reporting and scheduling. This program is
to be used in a network environment where a centralized computer will be used to monitor
multiple FLEX Panels.
However, Log Commands can be added for debugging and programming purposes. These
log command can be revealed when you use the CONNECT command within the
Flex Control
Builder . This will be discussed later.