FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 24)

LIT1368E Flex Training Manual
Page | 24
32600 LIT1368F
Add New Ethernet Device
The process is similar to adding an IR device or a serial device.
The differences are as follows:
While this project will not utilize an Ethernet type device, we will enter one to show a typical setup.
From the Library tree, select ETHERNET DEVICES and then matrix Switcher. Now click on the
FSR_PATHFINDER and while holding the left mouse button down, drag the device to the Project
tree and drop the device anywhere within the project tree.