FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 15)

LIT1368E Flex Training Manual
Page | 15
32600 LIT1368F
SPLASH SCREEN SET UP
The Splash screen is a full screen graphic image. It can be a school or corporate logo or any other
graphic. Splash screens can be displayed at power-up as well as be used when the Flex is in standby
mode. In this area, there are two options. The first simply asks if the Project will have a splash
screen. The second asks if you want the Splash screen displayed until it is pressed (Yes) or if you
choose (No) then it will be displayed for a predetermined period of time.
Libraries
ADDING DEVICES
TIP: To quickly widen the Library tree or the Project tree, simply click on the column header. This
will widen the column to the largest width of text within the tree and branches.
From the Library tree, select SERIAL DEVICES and then Projector. Now click on the Hitachi _CP-
X306 and while holding the left mouse button down, drag the device to the Project tree and drop
the device anywhere within the project tree.