FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 30)

LIT1368E Flex Training Manual
Page | 30
32600 LIT1368F
DEFINE SCREENS
Now we are going to build the screens that we require for this Project.
From the Library tree, select a Screen Template to be used as the splash screen. Screen empty0, and
Screen template 0 and are typical templates for the splash screen. Keep in mind that Screen
Template0 will not allow buttons to be added. Therefore, use of this template should be used for
Splash screens or screens that do not require button commands.
Select by left clicking on the template and dragging it and then dropping it over the Project tree.