FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 69)

LIT1368E Flex Training Manual
Page | 69
32600 LIT1368F
Select ‘MODE DVD’. This command will tell the DVD VCR to switch to the DVD Mode.
Note: The enter Repeat IR Code Times. Some IR devices require the code to be sent out
multiple times. Should this arise, set the number of repeats here. This is also an editable
item which you can go back to at a later time if necessary.
Click the ‘OK’ button.
Click on Send Command.
Select Projector.
Select the command ‘COMPONENT INPUT’.