FSR FLEX CONTROL BUILDER TRAINING MANUAL - Manual (Page 7)

LIT1368E Flex Training Manual
Page | 7
32600 LIT1368F
In this system we will use the FLEX to control the projector as our switcher. It will also handle
volume control. We will add screens to control the DVD/VCR Player
Okay let’s get started.
The first step is to open the Flex Control Builder. The steps we are going to follow to build this
project are as follows:
1. Configure the FLEX
2. Load the Device Libraries
3. Create our screens
4. Add buttons to our screens
5. Assign commands to the buttons
6. Download our project to the FLEX.