Foxconn N68S7AA-8EKRS2H User Manual

Page 72

Chapter 6 nVIDIA RAID Configurations

RAID BIOS Setup

1. After rebooting your PC, wait until you see the RAID software prompting you to
press [F10]. The RAID prompt appears as part of the system POST and boot pro-
cess prior to loading OS.
2. Enter the RAID BIOS Setup by pressing F10 when prompted,the --Define a New
Array-- window will appear.

Understanding the “Define a New Array” Window
Use the Define a New Array window to
• Select the RAID Mode
• Set up the Striping Block
• Specify which disks to use for the RAID Array

Depending on the platform used, the system have one or more adapters. In a typical
system there are usually one channel and multiple adapters.

The adapter/channel status of each hard disk is given in the Port columns of the
Free Disks and Array Disks lists.

1. 0

0: Channel

Adapter 0 is used for PATA drives;
Adapter 1 is used for SATA drives.

Note:

The RAID BIOS setup screens shown in this section are provided for
reference only, please refer to the phyical screens.

PDF 文件使用 "pdfFactory" 试用版本创建