Foxconn N68S7AA-8EKRS2H - Manual (Page 18)

Chapter 2 Installation Instructions
10
Memory
This motherboard includes four 240-pin slots with 1.8V for DDR2. You must
install at least one memory bank to ensure normal operation.
For the detailed memory support list on this motherboard, please visit the
website: http://www.foxconnchannel.com
Installation of DDR2 Memory
1. There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Warning:
Be sure to unplug the AC power supply before adding or re-
moving expansion cards or other system peripherals, espe-
cially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.
128-Pin 112-pin
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn