Foxconn N68S7AA-8EKRS2H - Manual (Page 44)

Chapter 3 BIOS Description
36
Hardware Health Configure
Hardware Health Configure Menu
v Fan 1 Mode Setting
This option is used to set the fan 1 configuration mode.
v Temperature 1 Limit of Hig/Sec/Thi/Low
This options are used to set the fan temperature limit.
v Fan 1 Highest/Second/Third/Fourth/Lowest Setting
This options are used to set the fan speed.
v Case Open Warning
This option is used to enable or disable Intruder Detection function.
v Warning Temperature
This option is used to set the warning temperature for the system.When the
temperature of CPU is higher than setting value,the motherboard will send off
warning information.
v CPU Temperature /System Temperature/CPU Fan Speed/ Fan Speed/
System Fan Speed/Vcore/+1.8V SUS/+1.2V CORE/+5V/VCC/VSB/VBAT
These items display the current CPU/chipset/system temperature,fan
speed and voltages that automatically detected by the system.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn