Foxconn N68S7AA-8EKRS2H User Manual
Page 41
Chapter 3 BIOS Description
33
PCI/PNP
Resource Management
PCI/PNP Resource Management Menu
v
IRQ & DMA Settings
Press [Enter] to enter the IRQ and DMA setup.
v
Clear NVRAM
This item is used to set whether clearing the NVRAM during system boot.
v
Plug & Play O/S
This item is used to set the plug and play function for your OS.
[No]:Lets the BIOS configure all the devices in the system.
[Yes]:Let the operating system configure plug and play devices not required
for boot if your system has a plug and play operating system.
v
PCI Latency Timer
This option is used to set the PCI latency timer. The value is in units of PCI
clock for PCI device latency timer register.
v
Allocate IRQ to PCI VGA
This item is used to set if allocate IRQ to PCI VGA.
[Yes]:Assigns IRQ to PCI VGA card if card requests IRQ.
[No]:Does not assign IRQ to PCI VGA card even if card requests an IRQ.
v
Palette Snooping
This item is used to set whether the palette snooping is enabled.
v
PCI IDE BusMaster
This item is used to set whether the PCI IDE bus master is enabled.If enabled,
the BIOS can use PCI bus mastering for reading/writing to IDE drives.
PDF 文件使用 "pdfFactory" 试用版本创建